Adding an entry to the telephone book
Begin as follows:
a
Msss
Program nos. Tel. drctry New
t Enter the name.
In this example: »Dean«.
Confirm your entry by pressing
O
.
Input telephone book
Name>Dean_
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
t Insert a number.
In this example: »0123456«.
Confirm your entry by pressing
O
.
Input telephone book
Number>0123456_
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
VIP Memory
YoucanprogramVIPnumbersforeach of the ten buttons 1 …0includinganame(20characters max. )and
a telephone number (26 digits max.).
Making an entry into the VIP memory
Begin as follows:
a
M s s s <> O
Program nos. VIP New
Select VIP
destination
t Enter the name of the VIP target. In this ex-
ample: »Dean«.
Confirm your entry by pressing OK.
Program VIP name
V0>Dean_
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
t Insert a number.
In this example: »012345«.
Confirm your entry by pressing OK.
Program VIP number
V0>012345_
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Station guarding
Ifyoudo not wishcalls to besignaledwiththeprogrammedmelody and volume,you can active the»Station
guarding«feature.Dependingonthespecific setting, all callswillbedisplayed opticallyor along with a brief
acoustic signal. In the idle state an »q«or»Q« in the display shows that the function »Station guarding« is
activated.
»No« Thefunction»Stationguarding«isdeactivated.
»Ringing
signal off«
Callsaresignaledoptically only(»Q«showninthedisplay).
»ok« Calls are signaled first by a brief acoustic signal and then only optically displayed
(»q«).
English
16
To Next Page
Loading...