elmeg CS410 - Telephone Operation

Enquiry Call
g
R
tg
Call with subscriber Party 1 is put on hold Dial number Call with subscriber 2
Call transfer (switching)
g
R
tg
s
Call with subscriber 1 Party 1 is put on hold Dial number Call with subscriber 2
transfer
Broker’s call
g
>s
g
>s
g
Call with sub
-
scriber
Connection 1
...
Connection 4
Call with desi
-
red subscriber
Connection 1
...
Connection 4
Call with desi
-
red subscriber
Three-party conference
g
>s
g
s
d
Call with subscriber
1
Connection 2
Call with subscriber
2
Conferen
-
ce
Conference with
subscribers 1 and 2
Telephone operation
Telephone directory
You can store up to 250 names and numbers in the telephone directory. To select a name, you can page
through the directory using the arrow buttons, or enter the specific first letter(s) of the name using the
push-button set.
If the name of the caller is to be shown in the display instead of the caller’s number, this number
mustbeenteredinthetelephonedirectorywiththat name (includingprefixand, when used with a
PABX, the line access digit).
Display of the caller name is only made when the transmitted number corresponds to the number
stored in the phone directory.
IfthetelephoneisdisconnectedfromtheISDNnetwork and then reconnected, or ifthedata for the telepho
-
ne directory are transferred to the system telephone via the PC program, the directory must be reorganized
internally. This process takes place automatically and may require a few minutes. During this time, the te
-
lephone directory of your telephone is not available for use.
Settings for telephone book entries
•
Name and number
•
Outgoingnumber (MSN assignment)
•
Special dial (VIP tone) tone
•
Info text
English
15