Elmo 16-CL Optical User Manual

Various , projections
.Quick review
This feature is used to see specific frames you wish to review. Turn the
control switch counter clock-wise from a~ all the way to ~ and the
film is quickly rewound through the gate. Then turn the control switch to
OFF, as soon as you get the desired frame for re-projection.
After making sure the film has stopped, turn the control switch from OFF
all the way to a~ through 1> .
Note:
o When the operation switch is se t to ~ f rom 0 F F, the projector
may start rewinding onl y a ft er a few seconds' pause depending
on
the film volume on the r ee l to be re wound. This is not a
fault but safety mechani sm for rewinding. Th e proj e ctor is designed
to increase motor torque gradually fo r the prot e ction of film .
When the operation switch is turned fr om ~ to OF F, t he f ilm
may stop with some length of slackened loop . I n such a case ,
wind up the loose portion by turning the take-up reel clockwise
by hand and then turn the operation switch to 1> .
8 Be sure not to turn the operation switch from 0 F F to ;> before
the film is brought to a complete stop.
9

Elmo 16-CL Optical Specifications

General

Brand	Elmo
Model	16-CL Optical
Category	Projector
Language	English