Elmo 16-CL Optical - Rewinding and Stowing; Stowing Procedure

12
Rewinding
• When the projection is completed, rewind the film as follows.
o
I nsert the film end into
the slot of the front reel
hub.
@ Turn the operation switch
to ~.
In this case the projector
may start rewinding only
after a few seconds' pause
depe
nding on the length of
film on the reel to be reo
wound . The projector is de-
signed to increase motor
torque gradually for the
protection of fi I m.
8 After the film is rewound, turn the operation switch to OFF .
• Stowing
Disconnect the power cord first.
o Fold the front and rear
arms by depressing the
folding buttons.
@ Return the power cord and take-up reel to their stowing
receptacles.
8 Turn the elevation control knob fully counterclockwise.
Never transport the projector with the elevation leg ex-
tended.