Elmo 16-CL Optical - Roller, Battery, and Sound Lens Cleaning

Use the stiff cleaning brush (supplied) to clean film channel gate, then
wipe
clean with lint-free cloth.
After the cleaning is over, align the two pins at the upper and lower
parts of the pressure plate holder with the corresponding slots on the
pressure
plate base and push it back to place.
• Cleaning rollers, solar battery and sound lens
Brush off the rollers, solar battery and sound lens with the clean soft
brush supplied.
Note:
If a dust adheres to sound lens
or solar battery, the tone quality
or volume will be decreased.
15