Twin Needle Hem
(optional needle)
A twin needle hem is quick and easy. It is especially
useful for very stretchy fabrics. Be sure to use a
stretch twin needle for knit fabrics.
Turn off the power switch and insert a twin needle.
Thread the machine in the same manner as for
single thread (see page 15), using both spool pins.
Pull one thread down behind each needle bar thread
guide (A).
Thread each needle from front to back.
Fold the hem up desired amount and topstitch with
the twin needle. Carefully trim away excess fabric
using sharp scissors. This is an excellent hemming
method for knit fabrics because the bobbin thread
zigzags, allowing the hem to stretch with the fabric.
Remove twin needle. Set up machine for single
needle sewing.
Zigzag Stitch
The zigzag stitch is a very versatile stitch. Simply
change its width and length. Use the zigzag to finish
raw edges, sew satin stitch appliques, sew on but-
tons, etc.
Overcasting
Simple zigzag stitching is used for finishing raw
seam edges to prevent fabric from unraveling. Fin-
ishing seam edges is called overcasting.
Place the fabric under the presser foot so the needle
swings off the fabric to the right.
23
A
To Next Page
Loading...
