38
Threading the Lower Looper
Open the looper cover.
Place the spool of thread on the right side spool pin.
* The points to thread for lower looper are marked
in green.
* A convenient threading chart is placed on the
machine body inside the looper cover.
1. Draw the thread through the right side thread
guide from back to front: A
* If the thread is coming out from the thread guide,
pass the thread through the thread guide
hole again as shown: B
Thread guide
2. After threading the thread guide bar, slip the
thread into the first guide on the machine as
shown.
Thread guide
3. Hold the thread at both ends and tug gently to
ensure the thread is correctly inserted between
the tension discs. ( If the presser foot lifter is
raised, the thread easily inserts between the
tension discs.)
Lower looper thread tension dial
1
2
3
(A) (B)
1
2
3
4
5
6
7
9
8
10
1
2
3
1
2
3
To Next Page
Loading...
