Need help?Do you have a question about the ELNA 6004 and is the answer not in the manual?
General| Type | Electronic |
|---|---|
| Stitches | 60 |
| Buttonhole Styles | 4 |
| Stitch Length | 5mm |
| Free Arm | Yes |
| Built-in Needle Threader | Yes |
| Drop Feed | Yes |
| LED Lighting | Yes |
Instructions for removing and attaching the top cover of the sewing machine.
Instructions for removing and attaching the face plate of the sewing machine.
Steps to remove and attach the base of the sewing machine.
Steps to remove and attach the bed cover of the sewing machine.
Steps to check common issues like power, light, or display.
Steps to prepare the machine for diagnostic tests.
Verifies operation of the LCD display and indicator LEDs.
Checks the functionality of all buttons on the control panel.
Evaluates the buttonhole sensor and lever mechanism.
Tests the bobbin winder switch operation.
Verifies the upper shaft positioning sensor.
Checks the operation of the zigzag step motor.
Checks the operation of the feed step motor.
Tests the functionality of the foot control pedal.
Verifies the speed control slide lever.
Checks the operation of the main motor.
Interprets test results and lists potential error codes.
To Next Page
