Need help?Do you have a question about the ELNA Elnita ec60 and is the answer not in the manual?
General| Type | Electronic |
|---|---|
| Stitch Length Control | Yes |
| Stitch Width Control | Yes |
| Stitch Options | 60 |
| Stitch Width | 7mm |
| Presser Feet | Included |
| Free Arm | Yes |
| Built-in Needle Threader | Yes |
| Speed Control | Yes |
| Stitch Length | 4mm |
| Weight | 6.5 kg |
| Dimensions | 40 x 30 x 18 cm |
| Buttonhole Styles | 7 one-step |
Adjusting the distance between the presser foot and needle plate.
Setting the correct needle position relative to the needle plate.
Aligning the rotary hook with the needle's travel.
Setting the needle bar's vertical position for proper timing.
Ensuring correct clearance between needle and hook tip.
Adjusting the highest position of the feed dog.
Ensuring the feed dog is parallel to the needle plate.
Adjusting the upper thread tension.
Procedures for adjusting the buttonhole lever guide and sensor.
To Next Page
