8
Raising and Lowering the Presser Foot
You can raise and lower the presser foot with the presser
foot lifter.
q Presser foot lifter
w Extra lifted position
You can raise the presser foot about 7 mm (1/4˝) higher
than the normal up position by exerting more pressure
when lifting the presser foot lifter.
q
w
q Home key
Press this key to enter the category selection.
w Open le key
Press this key and the open le window will open.
You can open embroidery designs saved in the machine’s
internal memory or on a USB ash drive.
e Set mode key
Press this key to enter the setting mode. You can
customize the machine settings to your preference.
The machine settings for common settings, embroidery
and language selection are available in this mode.
r Help key
Press this key to view the step-by-step visual guide about
the essential operations.
t Lockout key
Press this key to lockout the machine when threading the
machine, replacing the accessories, etc.
To reduce the risk of injury, all the buttons and keys are
deactivated.
To unlock the machine, press the lockout key t again.
y Next page key
To view the next page, press the next page key.
u Previous page key
To view the previous page, press the previous page key.
Common Keys
q
w
e
r
t
yu
NOTE:
Do not turn the hand wheel when the presser foot is
in the extra lifted position.
CAUTION:
Do not press the visual touch screen with hard or
sharp objects such as pencils, screwdrivers and
others. Use the touch panel stylus included in the
standard accessories.
To Next Page
Loading...
Need help?
General
