User Manual: Windows I-Series Interactive Signage
UM600086 Rev A, Page 29 of 45
Feature Spec Description
Contact smart card
Contactless communication at 13.56MHz
Supports 2-SAM or 4-SAM board (optional)
Antennas
Build-in direct matching antenna
Remote 50 ohm matching antenna (optional)
Interface type
USB2.0 compliant / HID support
Standard RS-232 signal level
Power supply 5.0VDC +/- 0.25V
Power consumption
< 330mA (idle mode)
< 430mA (operation mode)
Temperature
-20°C to 70°C (Operating)
-30°C to 70°C (Storage)
Humidity
10 to 85% (Operating)
10 to 90% (Storage)
NFC KIT allocation on I-Series
To Next Page
Loading...
