User Manual: Windows I-Series Interactive Signage
UM600086 Rev A, Page 30 of 45
Barcode Reader Kit (E093433)
You can optionally add a barcode reader (BCR) Kit to the I-Series in any of the three mounting
locations located on the display head bottom, left, and right of the touchcomputer
The barcode reader peripheral shall consist of a mechanical housing, which encloses a barcode
reader electrical module. The barcode reader peripheral shall have a USB connection to
interface with the I-Series system.
Feature Spec Description
Light Source 660nm visible LED
Optical sensor 2500 pixels Toshiba CCD sensor
Resolution 3 mil
Depth of Field 35 – 320mm
PCS 30% or more
Interface type USB HID / RS-232 (TTL) / KBW
Voltage + 5V DC ± 5%
Power 120mA @ 5VDC (typ.)
Standby currents 20 ~ 30 mA
Scanning Speed Up to 270 scans/sec
Operating temperature
0 °C to 55 °C
Storage temperature
-20 °C to 60 °C
Humidity
10% ~90% RH (non-condensing)
Ambient Light
Works in any lighting conditions, from 0 to 10,000 lux
BCR allocation on I-Series
To Next Page
Loading...
