CHAPTER
3
OPERATION
About Touchmonitor Adjustments
Your touchmonitor will unlikely require adjustment. Variations in video output and application may
require adjustments to your touchmonitor to optimize the quality of the display.
For best performance, your touchmonitor should be operating in native resolution, that is 1280x1024
at 80k-75 Hz. Use the Display control panel in Windows to choose 1280x1024 resolution.
Operating in other resolutions will degrade video performance. For further information, please
refer to Appendix A.
All adjustments you make to the controls are automatically memorized. This feature saves you from
having to reset your choices every time you unplug or power your touchmonitor off and on. If there
is a power failure, your touchmonitor settings will not default to the factory specifications.
3-17
To Next Page
Loading...
