Manuale istruzioni LAVASCIUGA MOD. ZLA40 – ZLA40C – ZLA40CB
5. Re-assemble.
Fig 30
NOTE the rubbers have symetrical dimensions, in this way they can be re-used, when
worn on one side, turning 180° and re-assembling upside down.
12.5. Dismantling the brush
The brush has a long life, and can be replaced with different brushes for diverse jobs.
Proceed as follows:
1. lift the brush plate leaning on the third wheel.
2. Take the brush,and, with a decisive movement , push down.
3. To insert a new brush, fit on the hub and push up, to fit the brush in the seat of the
hub.
12.6. Cleaning the suction tube
The suction tube needs cleaning to stop the incrustation of solid materials accumilating on the
inside. Proceed as follows:
1. Undo the tube from the dryer
2. Undo the tube from the tank
3. Clean the tube with plenty of running water, remembering to use the tube that goes
into the tank.
4. Re-assemble all.
05/07/11 Rev .0.0 Lavasciuga Mod.ZLA40 – ZLA40C – ZLA40CB
To Next Page
Loading...
