Manuale istruzioni LAVASCIUGA MOD. ZLA40 – ZLA40C – ZLA40CB
5. MOVING THE PACKING
The machine is delivered direct from the factory,mounted on a europallet.
The europallet must be moved using a fork lift truck.
CAUTION: Absolutely avoid stopping whilst moving the machine in its packing state.
No part of the machine is designed to take any weight.. therefore, not for any reason must
any raising hooks be placed on the machine. If the machine falls during lifting it could cause
grave damage to peronnel and itself .
6. UNPACKING THE MACHINE
Now the machine has to be unpacked.
Proceed as follows:
1. remove external packing, the machine will be fixed to the pallet base with steel straps.
2. Remove steel straps and fixings.
3. Tilting the pallet back gently, allow the machine to slowly roll off,keeping hold .
4. retain the steel straps and fixing bolts for any future re packing.
05/07/11 Rev .0.0 Lavasciuga Mod.ZLA40 – ZLA40C – ZLA40CB
To Next Page
Loading...
