GB-4
GB
Date and time: UTC
Information on the date and time display.
The current date and time appears when the
selection key is pressed. The time is given in
UTC format (universal time coordinated) and must
be adjusted to the local time, see http://www.
worldtimeserver.com/convert_time_in_UTC.aspx
or http://en.wikipedia.org/wiki/Time_zone#Time_
zone_as_offsets_from_UTC.
Important! Note summer and winter times.
Date and time: UTC
Holt to return
2010–03–15
03:20:18
The date is given in the format year – month – day.
Past meter readings
Consumption data dating as far back as 20 weeks
can be called up.
By pressing the selection key , consumption
data are displayed, which are given by month,
week or day, or 4-hour or ½-hour intervals.
“4 hour summary” example:
4 hour summary: Sat
2010-02-15 00:30→ 04:30
00000.351 → 00000.353m
3
Tari band
0.002 m
3
The timeframe is displayed with date and time for
the start and end of the period. The time is given
in UTC format (universal time coordinated) and
must be adjusted to the local time.
The meter reading is displayed for the start and
end of the period in m
3
.
The consumption for this period is indicated in m
3
.
The tariff band may be displayed.
Electronic index with communication module:
The symbol is displayed if, for example, the
tolerance between the internal time recording
and the actual time is too large. This can lead to
invalid consumption data. After the next time syn-
chronization, the consumption data are recorded
again correctly and disappears.
Tariff totals
If the optional tariff data are configured, they can
be called up here.
Tariff data with measured gas volumes are dis-
played by pressing the selection key .
“Previous tariff” example:
Previous tari
2010-01-01 → 2010-03-31
Tari: Winter (1)
0.810 m
3
The timeframe is displayed with the date for the
start and end of the period.
The selected tariff is displayed.
The consumption for this period is indicated in m
3
.
Text messages
The symbol signals receipt of a new message.
The message can be called up in this menu.
If the display was switched off and a new mes-
sage was received in the meantime, the message
will be displayed instead of the basic display when
the display is switched on again.
When navigating in the menu, the symbol is dis-
played in the main menu.
Opening valve
The
symbol appears if the valve or the gas
flow is open. This symbol is only displayed when
a valve is integrated in the gas meter.
If the valve was released while the display was
switched off, the release note will appear the next
time the index is switched on.
OFF
Opening valve
CECK IF APPLIANCES,
OFF, THEN HOLD
The note remains active until the valve has been
released.
If the selection key is not pressed, the display
will switch back to the basic display after 30 s.
To Next Page
Loading...
Need help?
General
