Quick Start Guide Minipack PS System 356808.103, 1v2-2008-10
13
Installing PowerSuite ⎯ PC Application
The PowerSuite software application enables you to configure and operate your Smartpack based
power supply system from a personal computer running MS Windows XP or Vista.
1. Install PowerSuite
Insert the CD in your PC drive, start the PowerSuite installation and follow &
accept the wizard default steps
2. Switch Smartpack ON and plug USB cable (Part 202073)
to Smartpack and to any available USB port in the PC
3. Wait for Windows to install USB drivers
Follow & accept the wizard default steps to automatically install the USB
drivers; the wizard runs twice
4. Start PowerSuite and establish connection
Select “Start > All Programs > Eltek Valere> PowerSuite”. On the toolbar,
click “Connect” button. On the Connection dialogue box, click the “Connect”
button
If PowerSuite fails communicating via the standard COM port, find the COMx assigned to
Smartpack (My Computer/ Properties/ Hardware/ Device Manager) and configure PowerSuite to
communicate via this COMx (read the instructions in the installation CD).
PowerSuite’s newest version is always available on our FTP server. Call your Eltek Valere’s
contact person.
1
2
3
4
New hardware
is ready to use
Communication Appendix