EasyManuals Logo

Eltek Valere Minipack User Manual

Eltek Valere Minipack
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
Quick Start Guide Minipack PS System 356808.103, 1v2-2008-10
15
External AC Fuses Recommended Rating
The site’s AC supply quality is of great importance. In general, a site with better AC supply quality
(stable nominal voltage) may use smaller breakers.
CAREFUL:
Minipack systems using 48V-400W rectifiers may also use the recommended external breakers specified in the 800W
Rectifiers table above, even though smaller breakers could be employed.
For more information, read document 2028364
WARNING:
Always replace a rectifier with blown internal AC fuse with a new module, and send the malfunctioning module for servicing.
WARNING:
You must always consider re-dimensioning the external AC fuses and AC cabling, before swapping 400W, 800W or
800W WIR Minipack rectifiers in the same Minipack system.
A
C
Mains Appendix
AC Mains No of Current Max. Ext. Fuse
Input Type Rectifiers per input (A)
205VAC 185VAC
Type
205VAC 185VAC
400VAC +N
3 phase (Y)
I48.77
{
9.72
}
10A-D/16A-C
{
e
q
ual
}
II 6
(
equal row I
)
(
equal row I
)
230VAC
3 phase (Δ)
III 4 15.2
{
16.8
}
16A-C
{
20A-C
}
IV 6
(
e
q
ual row III
)
(
e
q
ual row III
)
230VAC
1
p
hase
V417.5
{
19.4
}
20A-C
{
equal
}
VI 6 26.3
{
29.5
}
32A-C
{
e
q
ual
}
Doc 2024398,1v0
Notes:
Use the values in {} brackets in the 185VAC column, if you are
unsure or know that the available AC mains voltage may drop
below 205VAC.
Each phase feeds two 800W rectifiers
The recommendations apply for use of Thermal magnetic circuit
breaker, type Siemens 5SX or 5SY series, MG C60H series or
similar. For more information regarding External AC fuses and
other types of fuses, please read the document 2024398.
Recommended External AC Fuses per AC Mains Feed Input
Minipack Systems with 48 VDC 800W Rectifiers
AC Mains No of Current Max. Ext. Fuse
Input Type Rectifie
r
s
per input (A)
230VAC 150VAC 100VAC
Type
230VAC 150VAC 100VAC
400VAC +N
3 phase (Y)
I 4 7.73
{
7.73
}
[
14.22
]
25A-C
{
e
q
ual
}
[
e
q
ual
]
II 6
(
e
q
ual row I
)
(
e
q
ual row I
)
230VAC
3 phase (Δ)
III 4
(
equal row I
)
(
equal row I
)
IV 6
(
e
q
ual row I
)
(
e
q
ual row I
)
230VAC
1 phase
V 2 7.73
{
11.9
}
[
14.3
]
(
e
q
ual row I
)
VI 4 15.5
{
23.7
}
[
28.5
]
25A-C
{
32A-C
}
[
32A-C
]
VII 6 23.2
{
35.6
}
[42.7] 32A-C
{
40A-C
}
[50A-C]
Doc 2043538,1v0
Notes:
Use the values in {} brackets in the 150VAC column, if you are unsure or know that the
available AC mains voltage may drop between 230VAC and 150VAC, or use the
values in [] brackets in the 100VAC column if the voltage may drop below 150VAC.
Each phase feeds two 800W WIR rectifiers (Wide Input Range)
The recommendations apply for following air breaker types:
- Up to 32A, use Melnrining DBN32 C char series or similar
- Bigger than 32A, use Melnrining DB47-63A C char series or similar.
For more information regarding External AC fuses and other types of fuses, please
read the document 2043538.
Recommended External AC Fuses per AC Mains Feed Input
Minipack Systems with 48 VDC 800W WIR Rectifiers

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Eltek Valere Minipack and is the answer not in the manual?

Eltek Valere Minipack Specifications

General IconGeneral
BrandEltek Valere
ModelMinipack
CategoryPower Supply
LanguageEnglish

Related product manuals