Need help?Do you have a question about the Eltek FlatpackS 48/1800 HE and is the answer not in the manual?
General| Input Voltage Range | 85 - 300 VAC |
|---|---|
| Output Voltage | 48 VDC |
| Output Power | 1800 W |
| Weight | 1.5 kg |
| Power Factor | > 0.99 |
| Protection Features | Overvoltage, overcurrent, overtemperature, short circuit |
| Input Frequency Range | 45 to 65 Hz |
| Hold-up Time | > 20 ms |
| Safety Standards | IEC/EN/UL 62368-1 |
| EMC Standards | EN 61000-3-2, EN 61000-3-3 |
| Operating Temperature | -40 to +75°C (Derating above +55°C) |
General safety advice for handling, transport, installation, and service of equipment.
Precautions for temperature, humidity, dust, and protection against current surges.
Safety measures for installation, electrical connections, and handling hazardous voltages.
Specifies that only trained Eltek personnel or certified persons should operate the equipment.
Warns about energy hazards and dangerous voltages from charged capacitors inside the system.
Step-by-step guide on how to unlock and physically remove Flatpack S rectifier modules.
Step-by-step guide on how to unlock, insert, and secure Flatpack S rectifier modules.
Details RJ-11, RJ-45 pin-outs, customer I/O terminals, DIP switches, and alarm outputs.
Visual reference for cabling customer connections, programmable inputs, and alarm relay outputs.
Provides input voltage, current, frequency, and protection specifications for different models.
Details output voltage, power, current, hold up time, and regulation specifications.
To Next Page
