Need help?Do you have a question about the Eltek FlatpackS 48/1000 HE and is the answer not in the manual?
General| Input Voltage Range | 85 - 300 VAC |
|---|---|
| Output Voltage | 48 VDC |
| Output Power | 1000 W |
| Output Current | 20.8 A |
| Cooling Method | Convection |
| Protection Features | Overvoltage, Overcurrent, Overtemperature, Short Circuit |
| Operating Temperature | -40 to +75 °C |
General handling and operational advice for the DC power system.
Guidelines for protecting the system from environmental factors.
Safety measures to be taken before and during equipment installation.
Highlights the main technical advantages and characteristics of the FlatpackS modules.
General guidance for installing system components like rectifiers and controllers.
Instructions for safely removing Flatpack S rectifier modules from the power shelf.
Procedures for installing Flatpack S rectifier modules into the power shelf.
Guide on how to safely detach the Smartpack S controller from its slot.
To Next Page
