Eltek FlatpackS 48/1000 HE - 4. Operation; Front Panel - Flatpack S Rectifier Module; Front Panel Operation - Smartpack S Controller

Erro! Use a guia Página Inicial para aplicar Heading 1 ao texto que deverá
aparecer aqui. Erro! Use a guia Página Inicial para aplicar Heading 1 ao texto
que deverá aparecer aqui.
User’s Guide FlatpackS Rectifier & Supervision Modules, 13
4. Operation
Front Panel — Flatpack S Rectifier Module
The Power LED is OFF (mains unavailable), Flashing (controller accessing information)
or ON (powered).
Flatpack S HE rectifier’s front lamps
The Warning LED is ON (derating or similar minor warning), Flashing (over-voltage
mode) or OFF (OK)
The Alarm LED is ON (shutdown or similar major alarm) or OFF (OK, no alarm)
Front Panel Operation – Smartpack S Controller
This chapter describes the Smartpack S controller’s keys and indicators, and how to
operate the Smartpack S-based DC power system from the controller’s front panel.
Smartpack S controller’s front keys and indicators