Eltek FlatpackS 48/1000 HE - Accessing the Controllers Ethernet Port

Erro! Use a guia Página Inicial para aplicar Heading 1 ao texto que deverá
aparecer aqui. Erro! Use a guia Página Inicial para aplicar Heading 1 ao texto
que deverá aparecer aqui.
User’s Guide FlatpackS Rectifier & Supervision Modules, 9
Lock the controller
by
using a screwdriver to turn the locking screw ¼ of a turn counter clockwise to the
locked position (pos 1). Then, the rectifier will be securely locked in the shelf, or
ready for transport.
Notice
: in this position, the display is unlocked (

), see
“Accessing the
Controller’s Ethernet Port” on page <ET>
Accessing the Controller’s Ethernet Port
The controller’s Ethernet port can be accessed from the front (temporary
connections) or from the rear (permanently connections.
To access the
Smartpack S
controller
Ethernet port from the front, do following:
1- Lock the controller
(pos 1)
2- Slide
the controller’s
display unit
slightly out
Pos 1= SP S

and Display

Pos 2= SP S and Display 