ELTEX ESR-200 - Light Indication

ESR series routers 9
2.3. Light indication
ESR-1000 light indication
Metal interfaces state of GigabitEthernet is represented by two LED indicators: LINK/ACT - green
and SPEED -amber:
Figure 2.11 - RJ-45 socket appearance
SFP-interface status is represented by two RX/ACT and TX/ACT indicators:
Figure 2.12 - Optical interfaces' indicators
Table 2.6 - Light state indication of metal interfaces and SFP- interfaces
SPEED indicator is lit
LINK/ACT indicator is lit
Ethernet interface state
Off
Off
Port is disabled or connection is not
established
Off
Solid on
10Mbps or 100Mbps connection is
established
Solid on
Solid on
1000Mbps connection is established
X
Flashes
Data transfer is in progress
Table 2.7 - SFP/SFP+ interfaces states light indication
Glowing of RX/ACT
indicator
Glowing of TX/ACT
indicator
Ethernet interface state
Off
Off
Port is disabled or connection is not
established
Solid on
Solid on
Connection is established
Flashes
X
Receive data is in progress
X
Flashes
Data transfer is in progress
LINK/ACT
SPEED
RX/ACT
TX/ACT