____________________________________________________________________________________
____________________________________________________________________________________
14 NTU-1 Optical Network Terminals
To accept changes, click Apply Changes button.
It's strongly discouraged to modify configurations from this menu by your own forces. It may cause
loss of connection to the station device!
3.3.2 The Commit/Reboot submenu. Commit changes and rebooting the device
This tab is used to commit changes to system memory and reboot your system.
Click Commit and Reboot button to commit changes and reboot the device. Reboot can take a few
minutes.
3.3.3 The Password submenu. Access Control Configuration (password settings)
Use the tab to change device access passwords.
For password changing, select a username, enter the current and new passwords and then confirm new
passwords.
Empty user name and password will disable the protection.
Click Apply Changes button to accept and save changes and Reset button to cancel.
3.3.4 The Firmware Upgrade submenu. Firmware Update
This tab allows you to update your device firmware.
To update firmware, choose the firmware file in Software File name row (by Select File button) and click
Update. If you selected an incorrect file, you can delete it by Reset button.
To Next Page
Loading...
Need help?
General
