________________________________________________________________________________
_________________________________________________________________________________
Universal Network Terminal TAU-72.IP/TAU-36.IP 155
Show voice profile configuration
Show information about current
calls during conversation
Show previously entered
commands in CLI history
1-old password
2-new password
Set password for 'admin' user
1-old password
2-new password
Set password for 'supervisor'
user
1-old password
2-new password
Set password for 'operator' user
1-old password
2-new password
Set password for 'viewer' user
PBX application management
Command that allows to restart
the main application
Sip application management
Reregistrate ports for the chosen
SIP profile
Reset configuration
- dhcp - network settings in reset
configuration will be setted
dynamically
- dhcp - network settings in reset
configuration will be static (IP
address 192.168.1.2)
1-IP address
2-string:64
characters
Create configuration backup
1-IP address
2-string:64
characters
Restore the device configuration
from backup
Voice port testing (Phone
connected to the line indication
is present in test results)
1-IP address
2-network mask
address
3-IP address
1-IP address
2-network mask
address
Save configuration into non-
volatile memory
1-IP address
2-string:64
characters
Upload call log by TFTP protocol