_________________________________________________________________________________
_________________________________________________________________________________
156 Universal Network Terminal TAU-72.IP/TAU-36.IP
1-IP address
2-string:64
characters
Firmware update via TFTP
protocol
1-IP address
2-string:64
characters
Firmware update via FTP
protocol
Enter the configuration mode
Execute top level command
Exit the configuration mode
Enter the network settings
configuration mode
Execute top level command
Exit the network settings
configuration mode
no_vlan|vlan1|
vlan2|vlan3|
pppoe
Set traffic control interface
Set default interface
(no_vlan) for traffic control
no_vlan|vlan1|
vlan2|vlan3|
pppoe
Set RTP traffic interface
Set default interface
(no_vlan) for RTP traffic
no_vlan|vlan1|
vlan2|vlan3|
pppoe
Set signal traffic interface
Set default interface
(no_vlan) for signal traffic
Set network configuration
receiving via DHCP mode
Set static network setting
configuration receiving
mode
Use default gateway, received
via DHCP (default: don't use)
Use default gateway, setted
in the device configuration
Set main DNS server IP address
Set redundant DNS server IP
address
Set DSCP value for SIP packets
(default: 26)
Set DSCP value for SIP
packets to default
Configuration of DSCP for
RTP/RTCP packets
Set DSCP value for RTP/RTCP
packets for port (default: 46)
Set DSCP value for
RTP/RTCP packets for port
to default
Set DSCP value for RTP/RTCP
packets for voice profile (default:
46)
Set DSCP value for
RTP/RTCP packets for voice
profile to default
Enable NTP (default: disabled)
Set time synchronization interval
(default: disabled)
Disable periodic time
synchronization
For TAU-36.IP. For TAU-72.IP parameter value: 1-72