ELTEX TAU-36.IP - Page 169

________________________________________________________________________________
_________________________________________________________________________________
Universal Network Terminal TAU-72.IP/TAU-36.IP 169
show voiceport configuration
The command is intended for viewing port status.
Syntax.
show voiceport configuration <value>
Parameters
< value > – parameter 1-36
1
value.
Privilegy
priv
Command mode
EXEC
Example
tau-72# show voiceport configuration 1
================start dump config================
node: config.VOIP.ports.port_0
phone: 855101
user_name: 855101
auth_name: 855101
auth_pass: 855101
...
| Press any key to continue | Press 'q' to exit |
show voiceprofile
The command is intended for viewing voice profile configuration.
Syntax.
show voiceprofile <value>
Parameters
< value > parameter value: 1-8
Privilegy
priv
Command mode
EXEC
Example
tau-72# show voiceprofile 1
================start dump config================
node: config.VOIP.ports.port_def_0
aon: 4
taxophone: 0
min_flashtime: 200
flashtime: 600
...
| Press any key to continue | Press 'q' to exit |
1
For TAU-36.IP. For TAU-72.IP parameter value: 1-72