ELTEX TAU-36.IP - Page 212

_________________________________________________________________________________
_________________________________________________________________________________
212 Universal Network Terminal TAU-72.IP/TAU-36.IP
dtmfmode
The command is intended for setting DTMF transmission mode.
Syntax.
dtmfmode <value>
Parameters
<value>-inband;
rfc2833 (default);
info-with SIP INFO method.
Privilegy
priv
Command mode
CONFIG-SIP
Negotiation function 'no' command
Set DTMF transmission mode to default.
Example
tau-72(config-sip-profile)# dtmfmode info
fax detect
The command is intended for setting fax detection mode.
Syntax.
fax detect <value>
Parameters
<value>-none-detection disabled;
caller - detection on transmitting side;
callee - detection on receiving side;
both-detection on both sides (default).
Privilegy
priv
Command mode
CONFIG-SIP
Example
tau-72(config-sip-profile)# fax detect both