ELTEX TAU-36.IP - Page 213

________________________________________________________________________________
_________________________________________________________________________________
Universal Network Terminal TAU-72.IP/TAU-36.IP 213
fax codec
The command is intended for setting fax codec.
Syntax.
fax codec <value>
Parameters
<value> – g711a|g711u|t38 (по умолчанию: g711u)
Privilegy
priv
Command mode
CONFIG-SIP
Example
tau-72(config-sip-profile)# fax codec t38
ecan enable
The command is intended for enabling echo canceller.
Syntax.
ecan enable
Parameters
Command contains no arguments.
Privilegy
priv
Command mode
CONFIG-SIP
Example
tau-72(config-sip-profile)# ecan enable
ecan tail
The command is intended for setting cancelling echo duration, ms.
Syntax.
ecan tail <value>
Parameters
<value> – 8|16|24|32..128 (default: 64)
Privilegy
priv
Command mode
CONFIG-SIP
Example
tau-72(config-sip-profile)# ecan tail 128