ELTEX TAU-36.IP - Page 214

_________________________________________________________________________________
_________________________________________________________________________________
214 Universal Network Terminal TAU-72.IP/TAU-36.IP
vad
The command is intended for enabling VAD.
Syntax.
vad
Parameters
Command contains no arguments.
Privilegy
priv
Command mode
CONFIG-SIP
Negotiation function 'no' command
Disable VAD.
Example
tau-72(config-sip-profile)# vad
dialplan ltimer
The command is intended for setting L-timer value.
Syntax.
dialplan ltimer <value>
Parameters
<value>.number: 1-30 (default: 15)
Privilegy
priv
Command mode
CONFIG-SIP
Negotiation function 'no' command
Set default L-timer value.
Example
tau-72(config-sip-profile)# dialplan ltimer 10
dialplan stimer
The command is intended for setting S-timer value.
Syntax.
dialplan ltimer <value>
Parameters
<value>.number: 1-30 (default: 15)
Privilegy
priv