ELTEX TAU-36.IP - Page 215

________________________________________________________________________________
_________________________________________________________________________________
Universal Network Terminal TAU-72.IP/TAU-36.IP 215
Command mode
CONFIG-SIP
Negotiation function 'no' command
Set default S-timer value.
Example
tau-72(config-sip-profile)# dialplan stimer 5
dialplan start
The command is intended for setting start timer value.
Syntax.
dialplan start <value>
Parameters
<value>.number: 1-300 (default: 300)
Privilegy
priv
Command mode
CONFIG-SIP
Negotiation function 'no' command
Set default start timer value.
Example
tau-72(config-sip-profile)# dialplan start 20
dialplan rule
The command is intended for setting dialplan rule.
Syntax.
dialplan rule <value>
Parameters
<value>-string: 1000 characters
Privilegy
priv
Command mode
CONFIG-SIP
Example
tau-72(config-sip-profile)# dialplan rule ‘S5 L15 xxxxxx|xxxxxxx’