53
9. Programming the system
All required system settings are preprogrammed in the
works:
•Heatingphase:Comforttemperature21°Cfrom6.00hrs
to 23.00 hrs
•Loweringphase:Loweringtemperature17°Cfrom23.00
hrs to 6.00 hrs
•Decalcicationcycle:Saturday,11.00hrs
All settings mentioned above may of course be changed to
adapt them to your individual needs.
After 30 seconds without anything happening,
programming or special functions will close auto-
matically.
a) Setting of comfort and lowering temperatures
When the automatic mode is active (i.e. switching between
lowering temperature and comfort temperature is per-
formed automatically), a bar in the display’s bottom part in-
dicates the time of day when the desired temperature will
be the comfort temperature.
A sun symbol on the display indicates that the comfort tem-
peratureisactive;amoonsymbolindicatesthatthelower-
ing temperature is active.