elv FHT8-Set - Wall Mounting of the FHT8 R Heating Control

45
We recommend to use high-quality alkaline batteries
only. Operation of the heating control using accumula-
tors or conventional zinc-carbon batteries is possible,
operating time and radio range of the heating control
will, however, be reduced.
Furthermore, there will be a risk of malfunctions.
Make sure to insert the batteries correctly to avoid
damage to the electronic components of the heating
control.
• Closethebatterycompartment.
• Theheatingcontrolperformsashortdisplaytest.After
the display test, you have to set date and time).
• Ifthebatterysymbol(“
“)isdisplayedontheLCdis-
play, the battery voltage is low and the batteries should
be replaced as soon as possible.
The same applies, if the radio range decreases or if data are
nolongerdisplayedontheLCdisplay.
6. Wall mounting of “FHT8R“
a) Choosing an appropriate mounting location
Make sure to choose an appropriate location for mounting
the “FHT8R” heating control. This has to meet the follow-
ingrequirements:
•centralpositionintheroomwherethetemperatureisto
be controlled
•easyaccessforconvenientoperation
•mountingateyelevelforeasyreadingofthedisplay
•nomountingonabadlyinsulatedouterwall
•nodirectsunlight
•nointerferencefromheatsourcessuchasradiators,TV
sets, lamps, refrigerators,etc.