58
• Automatic operation
Intheautomaticoperatingmode(display“Auto”ontheLC
display) the room temperature is controlled according to the
set program for the weekday.
The temperature history for the current weekday is dis-
played on the bar scale on the bottom of the display.
A temporarily temperature change can be set easily with
the selection wheel. The next time a regular temperature
change is scheduled the thermostat will then automatically
return to the time-controlled program.
• Manual operation
In the manual operating mode (display “Manu”) the heating
control maintains the set temperature. An automatic time-
controlled change will not be performed.
This function is identical to the function of a conventional
thermostat.
• Holiday/party function
In this operating mode (display of suitcase symbol) the tem-
perature is kept at a certain fixed value for a defined peri-
od of time (e.g. the duration of a party or a holiday). After
this, the heating control automatically switches to the au-
tomatic mode.
Settingtheholiday/partyfunction:
•Selectthisoperatingmodewiththe“FUNKTION”keyand
set the period of time this function is to be active.
During the following 24 hours the temperature will be re-
duced every 30 minutes (party function). After 24 hours the
temperature will be reduced every day (holiday function).
Set the day you will return from your holidays. As of this day
and starting at 0.00 hrs heating will be performed with the
normal time program.