elv LS 50 - Table of Contents; Introduction; Proper Use

32
List of contents
Page
Introduction ...................................................................................... 2
Proper Use ....................................................................................... 2
List of Contents ................................................................................ 3
Safety Instructions............................................................................ 4
Description of Functions................................................................... 5
Brief Summary of Instructions for Use ............................................. 6
Instructions for Use .......................................................................... 6
1. Setting up ................................................................................... 6
2. Switching on ............................................................................... 7
3. Adjusting the set point temperature with the ,,+”/ ,,-” keys ......... 7
4. Selecting one of the programmed set point temperatures ......... 7
5. Modifying the programmed set point temperatures .................... 8
6. Manual standby function ............................................................ 8
7. Timer-controlled standby function ............................................ 10
8. Automatic power-off function .................................................... 11
9. Disabling the power bar-chart .................................................. 11
10. Switching over between °C and °F ......................................... 12
11. Calibrating the temperature reading by software .................... 12
12. Potential equalization ............................................................. 13
13. Attaching a new soldering tip .................................................. 13
Handling ......................................................................................... 14
Maintenance................................................................................... 14
Disposal ......................................................................................... 16
Troubleshooting.............................................................................. 16
Technical Data................................................................................ 16
Introduction
Dear customer, First of all we should like to thank you for purchasing
this product.
You have, with this soldering station, acquired a product whose design
and construction are completely state-of-the-art. To ensure safe
operation, you as the user must always observe these Operating
Instructions
Proper Use
●
This soldering station is intended exclusively for the purposes of
soldering and unsoldering electrical and electronic components
on printed circuit boards and modules, for solder-coating conductive
patterns and cable ends, and for manufacturing cable connectors.
●
It is not allowed to use the soldering station to heat liquids or plastics.
●
The soldering station may only be used indoors, i.e. not in the
open air. Contact with dampness or humidity, e.g. in a bathroom
etc., must be avoided under all circumstances.
●
Use other than that described above will result in damage to this
product and involves the risk of hazards such as short-circuit, fire,
electric shock, etc. The case must not be opened and no part of
the product may be modified or converted.
●
The Safety Instructions must be observed under all circumstances.