16
Disposal
In the event that the LS 50 has become unusable, it must be disposed
of in accordance with the applicable statutory regulations.
Troubleshooting
You have, with this soldering station, acquired a product whose design
and construction are completely state-of-the-art and whose operation
is completely reliable.
Do not open the device yourself. It contains no parts needing
maintenance. In the event of failure please send the device to our
service centre. Opening the device yourself first involves the risk of
electric shock and second will automatically invalidate the warranty
for this product.
In the event of the soldering station becoming in any way defective, it
must be disconnected immediately from the mains power supply and
secured against being switched on again unintentionally.
Please ensure that the Safety Instructions are observed at all times.
Technical Data
Soldering temperature:........................................... 150 °C to 450 °C
Resolution: ................................................................................. 1 °C
Soldering iron: ................................................................. 24V / 48W
Power supply:........................................... 230 -240 V / 50Hz / 70VA
Dimensions, soldering station: ..... 110 x 120 x 135 mm (W x H x D)
Dimensions, soldering iron: ......................................... 200 x 30 mm
To Previous Page
Loading...