54
●
The appliance is not intended for use by young children or infirm
persons without supervision.
●
Do not leave the packaging material Iying around. In the hands of
children, plastic film / bags, polystyrene foam, etc. may become a
dangerous toy.
●
In commercial premises, the accident prevention regulations of the
Association of Industrial Professional Associations with respect to
electrical systems and operating equipment must be observed.
●
In schools, training institutions, and hobby and self-help workshops,
use of any device operated via mains power must always be
supervised by responsible and properly trained personnel.
●
Warning- The soldering iron must be placed on its stand when not
in use.
Description of Functions
The LS 50 soldering station is made for excellent soldering
convenience. Thanks to its processor control it has been possible to
implement a wide variety of useful features, e.g. the direct selection of
up to three programmable set point temperatures, the standby and
automatic power-off functions, plus a liquid-crystal display (LCD).
Particularly in day-to-day operation, the user quickly learns to
appreciate the advantages of a soldering station with special
convenience features of this nature.
With the LS 50 it is possible not only to adjust the set point temperature
by means of the „+” / „-” keys but also to program up to three
temperatures (or, alternatively, two temperatures plus a standby
temperature) which can be quickly selected at the touch of a button.
The soldering station can thus be prepared on an individual, task-
oriented basis for the most varied soldering jobs, e.g. PCB work, wiring,
or soldering an insulating case.
The multi-function LCD provides clear, at-a-glance indication of all the
important parameters. It displays the current actual temperature in
extra large digits. At the same time it also displays the three
programmed set point temperatures. It can also display a bar-chart
providing a clear overview of the heat currently being supplied to the
soldering iron.
Further features, particularly useful in day-to-day use, are the integrated
Safety Instructions
●
The warranty will become void in the event of any damage caused
by failure to observe these Operating Instructions. We cannot
accept any liability for consequential damage.
●
We cannot accept any liability for damage to property or physical
injury caused by improper use or failure to observe the Safety
Instructions. The warranty will become void in such cases.
●
For reasons of safety and of certification no conversion or
modification of the soldering station is permitted.
●
The only power source permitted is an approved mains socket
(230-240 volts / 50 Hz) properly installed and connected to the
public power supply grid.
●
Please ensure that the soldering station is set up, switched on,
and operated in a proper, workmanlike and technically correct way,
always carefully observing these Operating Instructions.
●
If you have any doubt regarding the connection, safety measures
or operation of this device, please contact a specialist.
●
Having switched the soldering station on, never leave it unattended
in this condition.
●
Never use the soldering station in the proximity of any easily
inflammable, ignitable or combustible substances or gases.
●
Soldering releases vapours that represent a health hazard.
●
Always ensure that the workplace is well ventilated or use a suitable
extractor system.
●
Always be sure to protect your eyes and body from solder splashes
by wearing suitable goggles and clothes.
●
Always ensure when setting up the soldering station that the mains
cable cannot be squashed or damaged by any sharp edges.
●
Never place the soldering station in the proximity of any easily
inflammable or combustible materials, e.g. curtains.
●
Never expose the soldering station to any high temperatures, strong
vibrations, or humidity.
●
No device operated via mains power should be treated as a children
toy.
●
Young children should be supervised to ensure that they do not
play with the appliance.
To Next Page
Loading...