Elvaco CMe3100 DLMS Plugin - Page 34

CMe3100 DLMS Plugin User's Manual
CMe3100 DLMS Plugin User's Manual
page | 34 (48)
2022-02-23
Version 1.8
Load Profile 1
8
0
99
1
0
255
Profile Generic (7)
None
R
Load Profile 1
8
0
99
2
0
255
Profile Generic (7)
None
R
Billing Data
8
0
98
1
0
255
Profile Generic (7)
None
R
Standard Event Log
8
0
99
98
2
255
Profile Generic (7)
None
R
Fraud Event Log
8
0
99
98
3
255
Profile Generic (7)
None
R
Push Setup Meter Load Profile 1
0
1
25
9
0
255
Push Setup (40)
None
R
Push Setup Meter Load Profile 2
0
2
25
9
0
255
Push Setup (40)
None
R
Push Setup Meter Billing Data
0
3
25
9
0
255
Push Setup (40)
None
R
Push Setup Meter Standard
Event Log
0
4
25
9
0
255
Push Setup (40)
None
R
Push Setup Meter Fraud Event
Log
0
8
25
9
0
255
Push Setup (40)
None
R
Security Setup
0
0
43
0
0
255
Security Setup (64)
None
R
M-Bus registers dynamically
created from available data in the
M-Bus meter representing the
meter logical device
X=According to OBIS meter
mapping, see section 5.3.
X
X
X
X
X
X
Register (3)
None
R
M-Bus data dynamically created
from available data in the M-Bus
meter representing the meter
logical device
X=According to OBIS meter
mapping, see section 5.3.
X
X
X
X
X
X
Data (1)
None
R
Table 3 Meter logical device COSEM objects
7.5.2.1 SAP Assignment
SAP Assignment object can be read from the gateway to identify available logical devices
7.5.2.2 Association LN
This object holds the list of available COSEM objects on current selected logical device.
The COSEM objects for a specific meter logical device is a reflection of the available data
registers read from an M-Bus meter which has valid mapping information in the OBIS meter
mapping and the static objects according to Table 3. See section 5.3 for more information about
the OBIS meter mapping.
7.5.2.3 Clock
The clock object enables read/write of the internal gateway real time clock.
7.5.2.4 Logical Device Name
Data type: octet-string
This object holds the logical device name of the meter, 13 characters octet string.
The format of the logical device name is according to the following pattern:
<man><type><version><serial number> Example: ELV010112345678
Where
<man> = Three capital letter manufacturer number according to Flag Association representing
the meter manufacturer.