EasyManuals Logo

elvita CKF5200V User Manual

elvita CKF5200V
Go to English
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
GB
25
Installing your new appliance
Before using the appliance for the rst time you should read
the following recommendations.
Ventilation of appliance
To improve the e󰀩ciency of the cooling system and save
energy, it is important to maintain good ventilation around
the appliance. For this reason, su󰀩cient clear space should
be available around the refrigerator.
Recommendation: We recommend that there is at least
50–70 mm of clearance at the rear of the appliance, at least
100 mm above the appliance and at the sides, and enough
free space in front to allow the door to be opened through
115°, as shown in the following diagrams.
Note:
This appliance performs well within the climate class shown
in the table below. It may not work properly if it is left at a
temperature above or below the indicated range for a long
period.
Stand your appliance in a dry place to avoid high moisture
levels.
Keep the appliance out of direct sunlight, rain or frost. Stand
the appliance away from heat sources such as stoves, res
or heaters.
Levelling the appliance
To ensure that the appliance is level and that air can
circulate freely around the bottom rear of the appliance, it
may be necessary to adjust the feet. You can adjust them
manually by hand or by using a suitable spanner.
To allow the doors to self-close, tilt the top backwards by
about 10 mm.
Reversing the door
The side at which the door opens can be changed, from the
right side (as supplied) to the left side, if the installation site
requires.
Warning! The appliance must be disconnected from the
mains supply before the door is reversed. Unplug the
appliance from the power socket.
Tools you will need
8 mm socket wrench
Thin-bladed screwdriver
Cross-head screwdriver
8 mm wrench
Note:
If required, tilt the appliance backwards in order to gain
access to the base. You should rest the back of the
appliance on soft foam packaging or the like to prevent
damage. To reverse the door, the following steps are
generally recommended. Di󰀨erent models may correspond
to di󰀨erent illustrations. The model number is shown in the
illustrations. If your appliance does not have the same parts,
please ignore the relevant description.
1. Stand the appliance upright. Open the upper door,
remove the door racks (to avoid damaging them) and then
close the door.
Door racks
Climate class Ambient temperature
SN +10°C TO +32°C
N +16°C TO +32°C
ST +16°C TO +38°C
T +16°C TO +43°C
10 mm

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the elvita CKF5200V and is the answer not in the manual?

elvita CKF5200V Specifications

General IconGeneral
Brandelvita
ModelCKF5200V
CategoryRefrigerator
LanguageEnglish

Related product manuals