ID) is shown in the left-hand column, and the user name in the right-hand column. The list is organised alphabetically and
can be scrolled using the keys
and .
Press
to toggle between List display and Detail display.
List display
Detail display
Detail display with remapping active
In this mode the left-hand column remains unchanged, while the following detailed information relating to the selected ele-
ment appears in the right-hand column:
• ID of the indoor unit (possibly preceded by the √ symbol, if it is the main name associated with that ID), remapping
code (if included in the contacts list and active in the switchboard), stairway location (if specified in the contacts list).
• Name of the building in which the indoor unit is located (if specified in the contacts list).
• User name associated with the indoor unit.
• Any user information and/or second name (if specified in the contacts list).
The selection in the left-hand column can be moved to the previous or subsequent line using keys
and . The
right-hand part is updated accordingly.
In List mode the elements in the contacts list displayed on the screen can be filtered by typing the initial part of the name
you are searching for. To do this, use keys
- with the multi-tap method. For example, if you press key
(letter “E”) twice, then key (letter “L”) three times, the filter “EL” will be applied, meaning only the elements
with a name beginning “EL” will be displayed.
The filter is displayed on the left of first line at the top, after the icon
. During entry, the characters appear in grey; shortly
after the last keystroke (multi-tap timeout), they turn white and the filter is applied.
To Next Page
Loading...
Need help?
General
