EM TEST VDS 200N100 User Manual

M a n u a l
f o r O p e r a t i o n
VDS 200 series
Voltage Drop Simulator pulses 2b, 4
 VDS 200N10, N15, N30 N50
 VDS 200N100, N150 N200
 VDS 200N30.1 N50.1
 VDS 200N100.1 N100.2 N100.3 N100.4
N100.5 N100.6
 VDS 200N150.1
 VDS 200N200.1 N200.2 N200.3 N200.4
 RDS 200N
Testing of electronic modules in 12V/24V or 42V supply
systems.
The VDS 200Nx is a low frequency amplifier. It simulates the
battery power supply of a vehicle and complex power supply
distortions in the power range up to 12'000W. A lot of different
waveforms are integrated as standard such as pulse 2b and
pulse 4 required in ISO 7637.
 ISO 7637
 SAE J1113
 Manufacturer spec
GM, Ford, Chrysler,
BMW, VW, PSA,
Renault, Fiat ....
Version:
5.19 / 03.09.2013
the benchmark for emc
Replaces:
5.18 / 17.06.2013
Filename:
UserManual-VDS200Nx-E-V519.doc
Printdate:
03.09.13

EM TEST VDS 200N100 Specifications

General

Brand	EM TEST
Model	VDS 200N100
Category	Amplifier
Language	English

Summary

Model Overview

1.1. VDS Models

Lists standard VDS models with voltage, current, and inrush specifications.

1.2. RDS Models

Special Models

Details special VDS models with variations in voltage and current ranges.

Bipolar Models

Describes bipolar VDS models with specific voltage and current configurations.

RDS 200N Model

Introduces the RDS 200N model, its specifications, and applications.

2. Operating Functions

2.1. Front View

2.2. Rear View

2.3. VDS200N100.1 Operating Elements

Explains the operating elements specific to the VDS200N100.1 model.

2.3.2. Rear View VDS200N100.1

2.4. VDS 200N100.4 Operating Elements

2.5. VDS 200N100.6 Operating Elements

2.6. Safety with Voltage Setting

Explains safety restrictions and operational modes related to voltage settings.

3. Operation

3.1. Description of the Menus

Details the menu structure and operation of the VDS 200 simulator.

3.2.1. Change of Parameters

3.3. Wave Simulator

Waveform Simulator Menu Overview

Overview of the Wave Simulator menu options: Standards, Functions, DC Power Supply.

3.3.1. ISO 7637 Standards

3.3.2. ISO 16750-2 Standards

3.3.3. JASO Standards

3.3.4. Functions

3.4. Service

Service Options: Addresses, Selftest, Setup

4.5. Overvoltage Protection

Protection Features and Settings

Covers general protection, voltage level setting, function, and levels.

4.5.4. User Level Settings and Behavior

Details user-level protection setting steps and typical behavior with diagrams.

5. Technical Data

5.1. Test Level, Trigger, I/O, and Interfaces

Covers test levels, trigger modes, input/output connectors, and interface specifications.

5.6. Test Routines and Measurement

5.9. Technical Data VDS 200N100.2

5.10.1. DUT Voltage Limitation

5.10. Technical Data VDS 200N100.6

6. Maintenance

Test Setup and Software Control

6.5. Calibration and Verification

Details factory calibration, recommended intervals, and in-house verification.