What to do if no LED indicators are illuminated on my Em-Trak Transceiver?
If no LED indicators are illuminated on your Em-Trak Transceiver, check that the power supply is connected correctly and that it is a 12V or 24V supply.
General| Brand | Em-Trak |
|---|---|
| Model | B900 Series |
| Category | Transceiver |
| Language | English |
Essential safety precautions for installation and usage.
Guidelines for safe operation to minimize RF exposure and ensure proper installation.
Specific configuration rules for US customers regarding MMSI and vessel data.
Introduction and visual overview of the AIS transceiver.
Details and comparison of different B900 series variants and their features.
Explains how to download and use software for configuring the transceiver.
Details on connecting VHF and GPS antennas for optimal performance.
Instructions for connecting the power and data cable.
Steps and methods for configuring the AIS transceiver with vessel data.
How to connect the transceiver to NMEA 2000, chartplotters, and sensors.
Explains the meaning and function of the transceiver's LED status indicators.
How to enable/disable silent mode and its implications.
Lists common problems and their respective causes and remedies.
Technical details of the VHF transceiver, including frequency and output power.
Environmental specifications like waterproofing and operating temperature.
General explanation of the Automatic Identification System (AIS) and its purpose.
Explains the two categories of data transmitted by an AIS transceiver.
To Next Page
