Em-Trak B951 User Manual (English)

Other manuals for Em-Trak B951

Installation And Operation Manual58 pages

Quick Start Guide2 pages

Questions and Answers:

J
Judith ClaytonSep 7, 2025
Why is my vessel name not being received by other vessels using my Em-Trak B951 Transceiver?
- N
  Nicole AustinSep 7, 2025
  If your vessel name isn't being received by other vessels from your Em-Trak Transceiver, note that static data (containing vessel name, call sign, etc.) is transmitted every 6 minutes, so it may take a few transmissions before all the vessel data is displayed. Position reports contain critical data like position, MMSI number, vessel speed, etc., and this is transmitted more regularly.
D
diana86Sep 9, 2025
How to troubleshoot no illuminated indicators on my Em-Trak B951 Transceiver?
- M
  Melissa RobinsonSep 9, 2025
  If no indicators are illuminated on your Em-Trak Transceiver, check that the power supply is connected correctly and that the power supply is a 12V or 24V supply.
M
Mrs. Brittany MoralesSep 12, 2025
Why is my Em-Trak Transceiver vessel name not being received by other vessels?
- D
  douglasbarbaraSep 12, 2025
  If your Em-Trak Transceiver isn't sending vessel name data to other vessels, remember that static data (including vessel name and call sign) transmits every 6 minutes. It might take a few transmissions before all data appears. Position reports with critical information like position, MMSI, and speed are sent more frequently.
R
Ryan BrownSep 12, 2025
How to fix Em-Trak Transceiver connection issues with WiFi or Bluetooth?
- A
  Amanda RichardsSep 12, 2025
  If you can't establish a connection using WiFi or Bluetooth on your Em-Trak Transceiver, check that the transceiver is powered by 12 - 24V, review the configuration parameters using proAIS2, ensure there are no obstructions or sources of interference between the transceiver and your mobile device, confirm that the 5-minute Bluetooth pairing window hasn't expired (if it has, remove and reapply power, including USB), and verify you're not using Bluetooth with an Apple device.
E
Elizabeth SimonSep 14, 2025
What to do if Em-Trak Transceiver data is not being received by the chart plotter?
- J
  Jean BerrySep 14, 2025
  If your Em-Trak Transceiver is not sending data to the chart plotter, verify that the signal wires are correctly connected, the baud rate matches on both the transceiver and the chart plotter, and other vessels are within radio range and displayed on the Other Vessels tab of proAIS2 or CONNECT-AIS.

Em-Trak B951 Specifications

General

Type	AIS Transceiver
AIS Transceiver Class	Class B
Channel Bandwidth	25 kHz
Channels	2
Power Output	2W
Modulation	GMSK
GPS	Integrated
NMEA 0183	Yes
NMEA 2000	Yes
Waterproof Rating	IPx7
Frequency	162.025 MHz
Supply Voltage	9-32 V DC
Power Supply	DC
Interface	NMEA0183, NMEA2000
Operating Temperature	-15°C to +55°C
Certifications	CE, FCC
Waterproof	Yes