Em-Trak B954 Installation And Operation Manual

58 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

AIS Class B transceiver

Installation and operation manual

Table of Contents

Other manuals for Em-Trak B954

User Manual56 pages

Quick Start Guide2 pages

Questions and Answers:

C
Christopher ThorntonSep 7, 2025
Why is my vessel name not being received by other vessels using my Em-Trak B954 Transceiver?
- J
  Jennifer MullenSep 7, 2025
  If your vessel name isn't being received by other vessels from your Em-Trak Transceiver, note that static data (containing vessel name, call sign, etc.) is transmitted every 6 minutes, so it may take a few transmissions before all the vessel data is displayed. Position reports contain critical data like position, MMSI number, vessel speed, etc., and this is transmitted more regularly.
L
Leah BarkerSep 9, 2025
How to troubleshoot no illuminated indicators on my Em-Trak B954?
- C
  cynthiaholmesSep 9, 2025
  If no indicators are illuminated on your Em-Trak Transceiver, check that the power supply is connected correctly and that the power supply is a 12V or 24V supply.
E
Eric GomezSep 12, 2025
Why is my Em-Trak Transceiver vessel name not being received by other vessels?
- T
  Terry KellerSep 12, 2025
  If your Em-Trak Transceiver isn't sending vessel name data to other vessels, remember that static data (including vessel name and call sign) transmits every 6 minutes. It might take a few transmissions before all data appears. Position reports with critical information like position, MMSI, and speed are sent more frequently.
S
Steven WebbSep 12, 2025
How to fix Em-Trak Transceiver connection issues with WiFi or Bluetooth?
- S
  shanemortonSep 12, 2025
  If you can't establish a connection using WiFi or Bluetooth on your Em-Trak Transceiver, check that the transceiver is powered by 12 - 24V, review the configuration parameters using proAIS2, ensure there are no obstructions or sources of interference between the transceiver and your mobile device, confirm that the 5-minute Bluetooth pairing window hasn't expired (if it has, remove and reapply power, including USB), and verify you're not using Bluetooth with an Apple device.
J
John FletcherSep 14, 2025
What to do if Em-Trak Transceiver data is not being received by the chart plotter?
- K
  kellyloweSep 14, 2025
  If your Em-Trak Transceiver is not sending data to the chart plotter, verify that the signal wires are correctly connected, the baud rate matches on both the transceiver and the chart plotter, and other vessels are within radio range and displayed on the Other Vessels tab of proAIS2 or CONNECT-AIS.

Em-Trak B954 Specifications

General

Type	Class B AIS Transceiver
Frequency	156.025 MHz to 162.025 MHz
Power Output	2W
Dimensions	140 x 100 x 50 mm
Weight	0.54 kg
Interface	NMEA 0183, NMEA 2000, USB
Waterproof Rating	IPx7
Output Power	5W
Waterproof	IPx7
Interfaces	NMEA 0183, NMEA 2000, USB
Frequency Range	156.025 MHz to 162.025 MHz
Modulation	GMSK
Operating Temperature	-25°C to +55°C
Power Supply	9-32V DC

Related product manuals

Preview: Em-Trak B953

Preview: Em-Trak B921

Preview: Em-Trak B900 Series

Em-Trak B900 Series

Preview: Em-Trak B924 CLASS B I

Em-Trak B924 CLASS B I

Preview: Em-Trak B922 CLASS B I

Em-Trak B922 CLASS B I

Preview: Em-Trak B100

Preview: Em-Trak AIS Class B

Em-Trak AIS Class B

Preview: Em-Trak A200

Preview: Em-Trak A100