EMAK EFCO MTH 510 - Declaration of Conformity

22
GB
F
D
E
NL
P
GR
TR
CZ
SK
RUS
UK
PL
H
LV
EST
LT
RO
11. DECLARATION OF CONFORMITY
The undersigned,
EMAK spa via Fermi, 4 - 42011 Bagnolo in Piano (RE) ITALY
declares under its own responsibility that the machine:
1. Type:
Chainsaw
2. Trademark: / Type:
OLEO-MAC GSH 51 - GSH 56 / EFCO MTH 510 - MTH 560
3. serial identication
837 XXX 0001 - 837 XXX 9999 (GSH 51 - MTH 510)
839 XXX 0001 - 839 XXX 9999 (GSH 56 - MTH 560)
complies with the requirements
established by directive
2006/42/EC - 2014/30/EU - 2000/14/EC
conforms with the provisions of the
following harmonized standards:
EN ISO 11681-1 - EN ISO 11681-1/AM 1 - EN 55012
conforms with the model that was
awarded EC certication No.
M.030 3.17.59 88 (GSH 51) - M.030 3.17.59 84 (GSH 56)
M.030 3.17.59 90 (MTH 510) - M.030 3.17.59 86 (MTH 560)
released from
ICE v. Garibaldi, 20 - 40011 Anzola Emilia (BO) - Italy n° 0303
Conformity assessment procedure
followed
Annex V - 2000/14/EC
Measured sound power level
110.2 dB(A) (GSH 51 - MTH 510) - 113.4 dB(A) (GSH 56 - MTH 560)
Guaranteed sound power level:
113.0 dB(A) (GSH 51 - MTH 510) - 116.0 dB(A) (GSH 56 - MTH 560)
Made at:
Bagnolo in piano (RE) Italy - via Fermi, 4
Date:
20/06/2017
Technical documentation available by: the administrative headquarter. - Technical Department
Fausto Bellamico - President
s.p.a.