To empty the grass-catcher:
1. lower the engine speed;
2. go into neutral (N) (☛ 4.4) and stop the
machine’s forward movement;
3. engage the parking brake on slopes;
4. disengage the blade (☛ 4.6);
5. hold onto the rear handle and tip up the
grass-catcher to empty it;
This operation can only be
done with the blade disengaged, otherwise
the engine stops.
5.4.7 U
NBLOCKING THE COLLECTOR CHANNEL
This job must only be performed with the engine turned
off.
If the collector channel gets blocked (due to accumulated grass cuttings filling up
the grass-catcher or an excessively high speed with relation to the quantity of
grass cuttings), you need to:
1. stop forward movement immediately, disengage the blade and stop the en-
gine;
2. remove the grass-catcher;
3. rremove the accumulated cuttings, reaching them from the exit of the collector
channel.
5.4.8 E
ND OF MOWING
When you have finished mowing, disengage the blade, lower the engine speed
and ride the machine with the cutting deck in the highest position.
!
WARNING!
NOTE
EN 22 HOW TO USE THE MACHINE
To Next Page
Loading...
