Ematic AGT419 - Simple Troubleshooting; No Display or No Sound Issues; Network Connection Problems; Remote Control and Picture Issues

Issue:
Possible Reason:
Solution:
Issue:
Possible Reason:
Solution:
No display after power on
The power cord is not properly connected
Make sure the device os connected to power
No sound
The device volume is too low
Try increasing the volume of the unit
Issue:
Possible Reason:
Solution:
Failed to connect to network
(1) Ethernet cable is not properly connected
(2) Wi-Fi is turned off the signal is too weak
(1) Reconnect the cable
(2) Restart the Wi-Fi or adjust the position of
the device closer to the router
Issue:
Possible Reason:
Solution:
Remote Control Failure
Remote control is broken or the batteries
are low in power
Replace batteries or send the device to
the local maintenance service station for
checking
SIMPLE TROUBLESHOOTING
Issue:
Possible Reason:
Solution:
No Pictures on screen
HDMI cable is not connected
Make sure that HDMI/AV is selected as
your TV input