Ematic FunTab - 3 G Settings

Setup | 12
CAUTION: Do not insert and remove the USB device repeatedly
in a short time, as this may cause damage to the device.
3GSettings
NOTE: A 3G wireless network card (purchased separately) is
required to connect to a 3G network.
The following is a list of 3G network specifications compatible with your
device:
Channel Access Method Network Device
TD-CDMA TD368
HUA WEI E220
HUA WEI E230
HUA WEI E160X
HUA WEI E169G
WCDMA
HUA WEI E1750
Bora 9380 CDMA2000
AWIT-U8
To connect to a 3G wireless network:
1 Insert the USB connector of the 3G wireless network card into the
USB interface.
2 Observe the bright lights on the 3G wireless network card, which
indicate the card is receiving power and is ready to begin
connection to the 3G network.
3 Tap the 3G Settings application icon
.
4 Tap Add 3G network.
5 Enter a Name for the 3G network in the name field of the pop-up
dialog box.
6 Observe that the network device field is selected for you by the
tablet.
7 Enter the Device number and APN, which are available from