Before installation, be sure to read all instructions and warnings carefully.
Refer to product data plate(s) for additional operating instruction and specifications.
INSPECTION
Examine the equipment when received. Notify your dealer or carrier of any damage or
missing parts. Verify that equipment is of size and model specified.
When installing and using this electrical equipment, basic safety precautions should
always be followed, including the following:
1) READ AND FOLLOW ALL INSTRUCTIONS.
2) WARNING - To reduce risk of injury, do not permit children to use this product unless they
are closely supervised at all times.
3) WARNING - (For cord & plug connected units) risk of electric shock. Connect only to a
grounding type receptacle protected by a ground-fault circuit-interrupter(GFCI).
Contact a qualified electrician if you cannot verify that the receptacle is protected by a
GFCI.
4) WARNING - (For cord & plug connected units). To reduce the risk of electric shock,
replace damaged cord immediately.
5) WARNING - (For cord & plug connected units). To reduce the risk of electric shock do not
use an extension cord to connect unit to electric supply; Provide a properly located
outlet.
6) WARNING - (For hot tub and spa pumps). Do not install within an outer enclosure or
beneath the skirt of the hot tub or spa, unless so marked.
7) SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
EMP U1602 2755
ST & ST Series PumpA
14
PUMP PARTS FOR ST
1.5"uni on ( Bl ac k/ W hite Colour )
M5*16 Scr ew f or p um p fr ont with Wash er
Impelle r SD 02 0/ SD 50/SQ20/S Q5 0/ SS 20 /SS50/ST2 0/ ST 50
Impelle r SD 33 /S D7 5/SQ33/SQ 75 /S S3 3/ SS75/ST33 /S T7 5
Impelle r SD 05 0/ SD 100/SQ050 /S Q1 00 /S S050/SS10 0/ ST 05 0
Impelle r SD 07 5/ SD 120/SQ075 /S Q1 20 /S S075/SS12 0/ ST 07 5
Impelle r SD 10 0/ SQ 100/SS100 /S T1 00 (2 20V/50HZ)
Impelle r SS 12 0( 22 0V/50HZ)
Impelle r SD 02 0/ SQ 020/SS020 /S T0 20 (2 20V,110V/ 60 HZ )
Impelle r SD 03 3/ SQ 033/SS033 /S T0 33 (2 20V,110V/ 60 HZ )
1/2" Mech an ic al S ea l
M8 x 25 Screw w it h Wa sh er f or Motor
Motor SD0 20 /S Q0 20 /SS020/ST 02 0( 22 0V /50HZ)
Motor SD0 33 ( 22 0V /5 0Hz)
Motor SD0 50 /S Q0 50 /SS050/ST 05 0( 22 0V /50HZ)
Motor SD0 75 /S Q0 75 /SS075/ST 07 5( 22 0V /50HZ)
Motor SD1 00 /S Q1 00 /SS100/ST 10 0( 22 0V /50HZ)
Motor SD1 20 /S Q1 20 /SS120/ST 12 0( 22 0V /50HZ)
Motor SD/ SQ /S S/ ST 020(220V/ 60 HZ )
Motor SD/ SQ /S S/ ST 033(220V/ 60 HZ )
Motor SD/ SQ /S S/ ST 050(220V/ 60 HZ )
Motor SD/ SQ /S S/ ST 075(220V/ 60 HZ )
Motor SD/ SQ /S S/ ST 100(220V/ 60 HZ )
Motor SD/ SQ /S S/ ST 120(220V/ 60 HZ )
Motor SD/ SQ /S S/ ST 020(110V/ 60 HZ )
Motor SD/ SQ /S S/ ST 033(110V/ 60 HZ )
Motor SD/ SQ /S S/ ST 050(110V/ 60 HZ )
Motor SD/ SQ /S S/ ST 075(110V/ 60 HZ )
Motor SD/ SQ /S S/ ST 100(110V/ 60 HZ )
Motor SD/ SQ /S S/ ST 120(110V/ 60 HZ )
Base with M 5 x 20 S cr ew
Capacit or f or S S/ SD /SQ/ST050 P um p 11 0V
Capacit or f or S C0 50 & S S/SD/SQ/S T0 75 P um p 11 0V
Capacit or f or S C0 75 & S S/SD/SQ/S T1 00 -1 24 P ump 110V
Capacit or f or S S/ SD /SQ/SP/ST 05 0 Pu mp
Capacit or f or S S/ SD /SQ/SP/ST 07 5 & SC 05 0 Pu mp
Capacit or f or S S/ SD /SQ/SP/ST 10 0- 12 0
Capacit or f or S S/ SD /SQ/ST020 P um p 11 0V
Capacit or f or S S/ SD /SQ/ST033 P um p 11 0V
Capacit or f or S S/ SD /SQ/ST020 A MU 02 0P /T P(50/60Hz )
Capacit or f or S S/ SD /SQ/ST033 P um p
Cable Box f or S Q/ ST /S D020-033, S S0 20 -S S0 30 Pump
Cable Box f or S D, SQ ,S P,ST050-1 20 P um p
Cable Box f or S T0 50 -S T075 Pump (11 0V /6 0H Z)
Cooling f an f or S S/ SD /SQ/ST050 -S S/ SD /S Q/ST120 Pum p
Cooling f an f or S S/ SD /SQ/ST020 -S S/ SD /S Q/ST030 Pum p
Fan Cover f or S S/ SD /S Q/ST020-S S/ SD /S Q/ ST030 Pump
Fan Cover f or S Q/ SP /S S/SD/ST05 0- SQ /S P/ SS/SD/ST1 20
O-Ring fo r 1. 5" U ni on
Notes:1 * 89 28 01 05 B is 1.5"unio n in B la ck C ol our
1* 89280105 W is 1 .5 "u nion in White C ol ou r
1 2
3
4
5
6
7
8 9
11
18
10
10
10
13
10
12
16
17
12
14
16
17
10
16
17
15
12
10
220 V 5 0 HZ 220 V 5 0 HZ 110 V 60HZ
To Next Page
Need help?
General
