Emax Interceptor RaceView User Manual

Tinyhawk II
5
emax-usa.com
(2)Press the button and hold for 5s again to save parameters and exit the menu.
After saving and exiting the menu, all LED goes out.
3.Enter/Exit Band / Channel / Power option
(1) After entering menu, short click button to switch frequency group band /
frequency point / power, and the LED of the corresponding menu is lit.
(2) Press the button and hold for 2s to enter frequency group band / channel /
power option.
(3) Press the button and hold for 2s again to exit frequency group band / channel /
power option and return to the menu.
4. Band / Channel / Power parameter change
After entering frequency group band / channel / power option, short click button to
change the parameter.
Notice: If you change to an illegal channel using SmartAudio, there will be no image
transmitting from Tinyhawk II. To switch back to a legal channel, press the button on
the vtx and follow the vtx menu guide shown below.
CE and FCC unlicensed user chart

Emax Interceptor RaceView Specifications

General

Brand	Emax
Model	Interceptor RaceView
Category	Drones
Language	English